The
Cyclone straight shafted light brush cutter comes with a solid shaft, complete
with nylon cutter head AND steel blade & a shoulder harness, all for under
$400 !!
The
Cyclone BC260D is a high powered 26cc 2 stroke unit which has durable
“Full-Crank” engine design.
IDEAL
FOR:most larger domestic situations for trimming or
mowing grass & weeds.
2 stroke 26cc “Full-Crank” engine
Durable solid steel drive shaft
Easy to start engine with “primer”
Simple to operate & reload nylon cutter head
Comes complete with should comfort strap & steel cutting blade
To
save money, why not replace your old lawnmower engine, rather than buy a new
mower? Replace the heart of your lawnmower with a NEW Cyclone 4 stroke OHV
engine.
IDEAL
FOR: most common models of alloy lawnmower such as Masport, Lawnmaster, Rover, Victa, Honda etc. (NB: please check with
compatibility if you are not sure)*
Cyclone CG-300 Multi-Attach KIT including Pole Pruning Saw
Honda EZ2200u#390
The
versatile Cyclone CG-300 multi-attachment combi system – the most versatile
tool you will have at home.
The
CG-300 multi-attach kit is a high powered engine complete with a range of easy
fit attachments. The CG-300 comes complete with the powerhead, brushcutter
attachment, high reaching hedge trimmer attachment AND pole pruning high reach
chainsaw cutter.
IDEAL
FOR:all your home weed eating &
line trimming duties, plus take care of your hedges, plus prune all those high,
hard to reach trees & branches.
High performance 26cc 2 stroke engine
Solid drive shaft with clutch
Solid state electronic ignition with easy
start engine
Easy click fitting (no tools required) of all
tool attachments
Comes complete with
Engine power head unit
Shoulder harness
Brushcutter attachment with - nylon cutter
head & steel 4 tooth cutting blade
The HONDA powered MASPORT 3” water pump
reflects great value for money for those wanting a well priced, but also good
quality volume water pump.
The Masport water pump is powered by a genuine
HONDA GX160 commercial grade engine. It has a big 3” (75mm) inlet & outlet,
with huge volume capacity – able to move up to 66,000 litres per hour.
IDEAL FOR: drainage contractors, pool owners, boat owners, farm & lifestyle
block owners, horticultural users etc.
Engine: Honda GX160 5.5hp 4-stroke
Weight: 32.0kg
3.0” diameter (75mm) inlet & outlet
Total head (metres max.) 28
Suction head (metres max.) 8
Litres per minute Max. 1,100 (66,000
litres/hour)
Framed with carry handle.
c/w hose connections & inlet
filter/pick up – no hose included
The
MORRISON Novara 350AL is a great value for money, rust proof alloy bodied mower
made by MASPORT. It suits the small to medium sized lawn & has the
advantage of a rust proof body. Also
suits when you need the durability of a rust proof body, but also want to keep
the mower very light.
IDEAL
FOR: small to medium lawns, say 15 to 40 minutes cutting
time.
Chassis: Pressure cast
‘Armour Alloy’ construction (very light)
Engine: Briggs &
Stratton Classic 450 series 4 stroke engine
For more information please click here:Contact Us
Phone (NZ landline only) Free Ph.
0800-806 883.
Or from mobile 09-4795545
We are open 7 days a week.
Please note: Even though we show an extensive range
of STIHL brand equipment online, for “STIHL DEALERSHIP AGREEMENT” reasons, plus
reasons of safety & serviceability we are unable to sell STIHL product online.
Please Contact Usif you cannot find a local dealer, or you are not happy with your local
representation. Call toll free on 0800-806883. (New Zealand only).
We have
an ANTI-FRAUD policy on our website & its use. We will prosecute any identified
fraudulent activity on this website or related ordering systems in an attempt
to protect our valuable customers.
Wrights Outdoor Equipment Centre Shop address 522 East Coast Road Mairangi Bay, North Shore Auckland - NEW ZEALAND
Most logos, images & trademarks are covered by manufacturers copyright. This website & it's wording are under copyright 2004-2010, Wright's Outdoor Equipment Centre. Specifications can change without notice - we endeavour to keep details up to date. Please contact Wright's for confirmation.
All prices are in NZ$ & are GST inclusive unless otherwise stated. We always welcome your feedback.