Wrights Outdoor Equipment Centre

Buywright Shopping Mall - Wrights Outdoor Equipment Centre

522 East Coast Road, North Shore, AUCKLANDNEW ZEALAND

Phone (toll free NZ only) 0800-806883

Back to Home Page

 

Cyclone Outdoor Powered Equipment
Wrights Outdoor Equipment Centre

The Range of CYCLONE Outdoor Power Equipment

  • Chainsaws, line trimmers, brush cutters, hedge trimmers, long reach pruners, high reach hedge trimmers, lawnmowers, hand held pruning tools, pruning saws etc

 

Buywright Shopping Mall - Wrights Outdoor Equipment Centre

522 East Coast Road, North Shore, AUCKLANDNEW ZEALAND

Phone (toll free NZ only) 0800-806883

Back to website  Home Page

 

cyclone_AX500.jpg Cyclone AX500 5.0hp OHV LAWNMOWER
4007
Honda EZ2200u#390

This is New Zealand’s best value for money medium sized lawnmower.*

The CYCLONE AX500 suits the average sized domestic KIWI lawn, with a deluxe 5.0hp OHV (over head valve) engine. The CYCLONE OHV (over head valve) engine offers improved fuel efficiency, lower noise levels & greatly reduced emissions. The same engine is also used on other well known brands of commercial mowers. The AX500 has enough power to easily cope with most domestic lawn types. 

IDEAL FOR: typical medium sized lawns, say 30-60 minutes cutting time.

  • Wide cut 480mm (19”) cutting width – rust proof armour alloy body (pressure cast)
  • Powered by the latest hi-tech Cyclone 5.0hp OHV 4 stroke engine - with 5 year engine warranty* - the only brand of engine on the market with a 5 year warranty
  • Over head valve engine gives you up to 35% fuel saving, reduced emissions & lower noise
  • Heavy duty, “easy push” 8” double bearing wheels
  • 2 blade Turbo catching blade system
  • Huge capacity, easy to empty, light to carry, fabric catcher
  • Exclusive 5 year domestic users warranty* (5 years on engine also!!)*

 

For more information please CONTACT US

 


NZ$698.00 Our Sale GO Price! NZ$598.00
Add to Cart
cyclone_CS5200.jpg Cyclone CS-4500 18" CHAINSAW c/w carry case

Honda EZ2200u#390

Fantastic value for money where you want a “bigger than normal” chainsaw, but without the “bigger than normal” price tag. These Cyclone CS-4500 chainsaws are not a cheap throw away saw, but do represent good value at a great price, where you want the back up a service dealer offers..

They come complete with 18” bar & a heavy duty plastic carry case.

IDEAL FOR: most domestic situations for the occasional user who wants the back up from a service dealer, that department stores won’t offer. A real Grunter for power.

  • 2 stroke 45cc “Full-Crank” engine
  • 18” (460mm) cutting blade with heavy duty pitch .325 cutting chain (Oregon chain made in USA)
  • Durable industrial specified engine
  • Safety chain brake auto-stop
  • Automatic oiler system
  • Full anti-vibration system
  • c/w solid plastic carry case, spark plug spanner & sharpening file
  • Electronic ignition system
  • 2 year domestic warranty.

 

For more information please CONTACT US

 


NZ$299.00 Our Sale GO Price! NZ$279.00
Add to Cart
Oregon Chainsaw CHAIN 18"
3223
Genuine OREGON (USA) 325 pitch chainsaw chain to fit many models of Husqvarna or Jonsered 18" saws
Also fits CYCLONE 18" CS4500
Chain is 325 pitch - 058 guage - 72 drive links
Also fits many models of Husqvarna, Jonsered, Poulan

NZ$78.00 Our Sale GO Price! NZ$60.00
Quantity:
cyclone_CS5200.jpg Cyclone CS-5200 20" CHAINSAW c/w carry case

Honda EZ2200u#390

Fantastic value for money where you want a “bigger than normal” chainsaw, but without the “bigger than normal” price tag. These Cyclone CS5200 chainsaws are not a cheap throw away saw, but do represent good value at a great price, where you want the back up a service dealer offers..

They come complete with 20” bar & a heavy duty plastic carry case.

IDEAL FOR: most domestic situations for the occasional user who wants the back up from a service dealer, that department stores won’t offer. A real Grunter for power.

  • A huge 52cc 2 stroke “Full-Crank” engine
  • 2.1kwatt power output
  • 20” (500mm) cutting blade with heavy duty pitch .325 cutting chain (Oregon chain made in USA)
  • Durable industrial specified engine
  • Safety chain brake auto-stop
  • Automatic oiler system with adjuster
  • Full anti-vibration system for improved operator comfort
  • Electronic ignition system
  • c/w durable plastic carry case, spark plug spanner, chain sharpening file
  • 2 year domestic warranty.

 

 

For more information please CONTACT US


NZ$399.00 Our Sale GO Price! NZ$329.00
Add to Cart
Oregon Chainsaw CHAIN 20"
3865
Genuine OREGON (USA) 325 pitch chainsaw chain to fit many models of Husqvarna or Jonsered 18" saws
Also fits CYCLONE 20" CS5200
Chain is 325 pitch - 058 guage - 76 drive links
Also fits many models of Husqvarna, Jonsered, Poulan

NZ$82.00 Our Sale GO Price! NZ$65.00
Quantity:
cyclone_BC260D.jpg Cyclone BC260D BRUSHCUTTER
4031
Honda EZ2200u#390

The Cyclone straight shafted light brush cutter comes with a solid shaft, complete with nylon cutter head AND steel blade & a shoulder harness, all for under $400 !!

The Cyclone BC260D is a high powered 26cc 2 stroke unit which has durable “Full-Crank” engine design.

IDEAL FOR: most larger domestic situations for trimming or mowing grass & weeds.

  • 2 stroke 26cc “Full-Crank” engine
  • Durable solid steel drive shaft
  • Easy to start engine with “primer”
  • Simple to operate & reload nylon cutter head
  • Comes complete with should comfort strap & steel cutting blade
  • 12 month domestic warranty.

 

For more information please CONTACT US

 


NZ$299.00
Add to Cart
cyclone_HT260.jpg Cyclone HT260 Petrol HEDGE TRIMMER

Honda EZ2200u#390

The versatile Cyclone HT-260 PETROL POWERED hedge trimmer. The HT-260 has a long reaching cutting bar (600mm long), with double sided cutters & now with “pivoting rear handle” multi-position handles for greater operator comfort.

IDEAL FOR: most domestic hedge & shrub trimming jobs where an electric unit is too inconvenient. Has the convenience of greater power, plus portability

  • Heavy duty 600mm long cutters
  • Double reciprocating blades, with finger safety guard
  • Heavy duty gear box drive to cutters
  • Will cut up to 20mm green branches
  • 5 position rear handle for left, right, central & 45 degree cutting angles
  • Easy to operate “pivoting rear handle” for left or right handed use
  • Easy start 26cc 2 stroke engine (0.85kwatt output)
  • No assembly required
  • 2 year domestic users warranty

 

For more information please CONTACT US

 


NZ$299.00
Add to Cart
wrights_GT260.jpg Cyclone GT260 LINE TRIMMER
4032
Honda EZ2200u#390

Finally you can get a petrol powered line trimmer at a service dealer for under $200.

The Wright’s GT260 is a high powered 26cc 2 stroke unit which has durable “Full-Crank” engine design.

IDEAL FOR: most domestic situations for trimming grass & weeds where electric powered trimmers are not convenient.

  • 2 stroke 26cc “Full-Crank” engine
  • Durable flexi-cable drive shaft
  • Easy to start engine with “primer”
  • Simple to operate & reload nylon cutter head
  • 12 month domestic warranty.

 

For more information please CONTACT US

 


NZ$195.00
Add to Cart
cyclone_500engine.jpg Cyclone 5.0hp Vertical OHV Replacement ENGINE
4078
Honda EZ2200u#390

To save money, why not replace your old lawnmower engine, rather than buy a new mower? Replace the heart of your lawnmower with a NEW Cyclone 4 stroke OHV engine.

IDEAL FOR: most common models of alloy lawnmower such as Masport, Lawnmaster, Rover, Victa, Honda etc. (NB: please check with compatibility if you are not sure)*

  • Latest OHV technology 5.0hp OHV industrial class Cyclone 4 stroke engine
  • Cleaner burning OHV engine technology – greatly reduced emissions
  • Easy start, electronic ignition
  • Full cartridge air filter system for extended life
  • Over Head Valve efficiency improves fuel efficiency by up to 35%
  • Standard mounting pattern to fit most chassis designs*
  • Dimensions – 420mm x 355mm x 315mm (LxWxH)
  • Shaft size 7/8” diameter, length 80.2mm
  • 2 year engine warranty for domestic users*
  • Extend warranty of 5 years available when fitting done by us*

 

For more information please CONTACT US

 


NZ$395.00 Our Sale GO Price! NZ$299.00
Add to Cart
cyclone_EA520.jpg Cyclone EA-520 POST HOLE BORER c/w x2 augers
4567
Honda EZ2200u#390

The versatile Cyclone EA-520 Earth Auger post hole borer.

The EA-520 represents fantastic value for money for hole digging up to 300mm diameter holes. Why would you bother hiring a borer?

The EA-520 comes complete with 2 augers – x1 150mm (6”) & x1 200mm (8”) & is powered by a high performance 52cc 2 stroke engine.

IDEAL FOR: all hole digging duties for fences, retaining walls, planting, orchards, vineyards, drainage etc.

  • High performance 52cc 2 stroke engine
  • Heavy duty gear box drive with “worm drive” for more positive power drive with less “shock” to the operator if you hit a buried object
  • Comfort handle design allows greater operator control & safety of the borer unit
  • Will drive up to 300mm diameter augers
  • No assembly required

Comes complete with 

  • 150mm (6”) auger
  • 200mm (8”) auger
  • 2 year domestic users warranty

Optional EXTRAS – (will fit other brands of borer (7/8” drive)

  • 100mm auger $99
  • 250mm auger $175
  • 300mm auger $199

 

For more information please CONTACT US

 


NZ$599.00
Add to Cart
Cyclone Auger 100mm

100mm auger to fit Cyclone (and other) post hole borers.
800mm long with standard 7/8" shaft size
Will also fit Tas, Tanaka, Echo, Komatsu Zenoah borer units

NZ$99.00
Add to Cart
Cyclone Auger 150mm

150mm auger to fit Cyclone (and other) post hole borers.
800mm long with standard 7/8" shaft size
Will also fit Tas, Tanaka, Echo, Komatsu Zenoah borer units

NZ$125.00
Add to Cart
Cyclone Auger 200mm

200mm auger to fit Cyclone (and other) post hole borers.
800mm long with standard 7/8" shaft size
Will also fit Tas, Tanaka, Echo, Komatsu Zenoah borer units

NZ$150.00
Add to Cart
Cyclone Auger 250mm

250mm auger to fit Cyclone (and other) post hole borers.
800mm long with standard 7/8" shaft size
Will also fit Tas, Tanaka, Echo, Komatsu Zenoah borer units

NZ$175.00
Add to Cart
Cyclone Auger 300mm

300mm auger to fit Cyclone (and other) post hole borers.
800mm long with standard 7/8" shaft size
Will also fit Tas, Tanaka, Echo, Komatsu Zenoah borer units

NZ$199.00
Add to Cart
wrights_GT260.jpg Cyclone GT260HD Line Trimmer
4186
Honda EZ2200u#390

Finally you can get a petrol powered line trimmer at a service dealer for under $200.

The Wright’s GT260 is a high powered 26cc 2 stroke unit which has durable “Full-Crank” engine design.

IDEAL FOR: most domestic situations for trimming grass & weeds where electric powered trimmers are not convenient.

  • 2 stroke 26cc “Full-Crank” engine
  • Durable flexi-cable drive shaft
  • Easy to start engine with “primer”
  • Simple to operate & reload nylon cutter head
  • Comes complete with should comfort strap
  • 12 month domestic warranty.

 

For more information please CONTACT US

 


NZ$225.00
Add to Cart
cyclone_secateurs.jpg Cyclone Japanese Steel YJ20 Quality Bypass SECATEURS
4354
Honda EZ2200u#390

IDEAL FOR: most domestic pruning situations, trimming & pruning fruit trees, shrubs, twigs, bamboo, horticultural pruning, vines etc.

  • Precision ground cutter blades for improved durability
  • Easy operation “Bypass” cutting action
  • Quality Japanese steel
  • PVC coated handles for greater comfort
  • Easily cuts up to 15mm thickness
  • 5 year warranty.

 

For more information please CONTACT US

 


NZ$15.00 Our Sale GO Price! NZ$8.50
Quantity:
cyclone_hedgeshearwavy.jpg Cyclone 10" Wavy Blade HEDGE SHEARS
4357
Honda EZ2200u#390

IDEAL FOR: most hedge trimming & domestic pruning situations, trimming hedges, fruit trees, shrubs, bamboo, vines, grass, weeds etc.

  • Precision ground cutter blades for improved durability
  • 240mm WAVY cutter blades with greater cutting aggressiveness
  • Easy shear cutting action
  • Quality steel construction
  • Durable rubber “easy grip” comfort handles
  • 5 year warranty.

 

For more information please CONTACT US

 


NZ$25.00 Our Sale GO Price! NZ$19.50
Quantity:
cyclone_hedgeshearstraight.jpg Cyclone 8 Straight HEDGE SHEAR
4356
Honda EZ2200u#390

IDEAL FOR: most hedge trimming & domestic pruning situations, trimming hedges, fruit trees, shrubs, bamboo, vines, grass, weeds etc.

  • Precision ground cutter blades for improved durability
  • 200mm STRAIGHT cutter blades with greater cutting precision
  • Easy shear cutting action
  • Quality steel construction
  • Durable rubber “easy grip” comfort handles
  • 5 year warranty.

 

For more information please CONTACT US

 


NZ$25.00 Our Sale GO Price! NZ$19.50
Quantity:
cyclone_pruningsaw.jpg Cyclone YL300 Japanese Steel 300mm PRUNING SAW
4355
Honda EZ2200u#390

IDEAL FOR: most pruning & woodcutting jobs around the home or property. Prune branches, twigs, wood, trim large hedge branches, prune your fruit trees, shrubs, cut out bamboo & cut small timber on your “DIY” projects.

  • 300mm double cutting action precision ground cutter blades
  • Diamond point cutting blades for aggressive, but precision cutting
  • Blade never needs sharpening
  • Convenient wooden storage scabbard
  • Made in Japan
  • Fast cutting action
  • 5 year warranty.

 

For more information please CONTACT US

 


NZ$38.50 Our Sale GO Price! NZ$30.00
Quantity:
cyclone_polepruner.jpg Cyclone 4.0m POLE PRUNER c/w Saw Blade
4353
Honda EZ2200u#390

IDEAL FOR: most domestic high pruning situations, trimming & pruning fruit trees, shrubs, twigs, bamboo, horticultural pruning, high trees, vines etc.

  • Heavy duty aluminium pole which extends out to a maximum height of 4.0m
  • Precision ground cutter blades for improved cutting efficiency
  • Easy operation “Bypass” cutting action on the pruner
  • c/w 320mm long pruning saw blade
  • 4 pulley, double action rope & pulley system for easy pull cutting
  • Simple locking mechanism for the extension poles – (3 poles – 2 extension poles)
  • Work safely from the ground – no more need for ladders & dangerous trestles
  • 5 year warranty.

 

For more information please CONTACT US

 


NZ$89.00 Our Sale GO Price! NZ$79.00
Quantity:
cyclone_pruningcombo.jpg Cyclone Pruning KIT - 4 piece combo
4369
Complete set of home pruning equipment
Includes -
- Cyclone pole pruner 4.0m
- 10" hedge shears
- Japanese steel secateurs
- 300mm YL300 pruning saw

NZ$168.00 Our Sale GO Price! NZ$115.00
Quantity:
Wrights Outdoor Equipment Centre
Shop address 522 East Coast Road
Mairangi Bay, North Shore
Auckland - NEW ZEALAND

Most logos, images & trademarks are covered by manufacturers copyright.
This website & it's wording are under copyright 2004-2010, Wright's Outdoor Equipment Centre.
Specifications can change without notice - we endeavour to keep details up to date. Please contact Wright's for confirmation.

All prices are in NZ$ & are GST inclusive unless otherwise stated.
We always welcome your feedback.